Drop your file, see the price.
FDM 3D printing on a Bambu Lab X2D, polyurethane casting, injection molding, 3D design and prototyping. Orders by Instagram DM.
ExampleBracket, 96 × 62 × 24 mm
Change the settings and the example's price changes at once. Your own file is priced the same way.
See the price of your own part
Try the example in 3Dor drag it onto this page. Up to 100 MB; your file stays in your browser until you send it.
Estimated price of the example part ₺250estimated One piece. Orders start at ₺250; this part alone is an estimated ₺123. | |
| Material | |
|---|---|
| Layer | |
| Infill | |
| Support | |
This part has no overhang to support, so the choice does not change the price. | |
| Mass (estimated) | 24.6 g |
A part is built from layers of molten filament: at 0.20 mm the example bracket is 120 layers.
| Printer | Bambu Lab X2D |
|---|---|
| Build volume | 256 × 256 × 256 mm |
| Layer height | 0.08 / 0.12 / 0.16 / 0.20 mm |
| Materials | PLA, PLA+, PETG, ABS, PA-12, TPU |
| Dimensional tolerance | Not published by the maker; give critical dimensions on a drawing. |
| Thinnest wall | 0.8 mm or more |
| Lead time | Shipped in about 2 days |
Services
A file, an idea or a part in your hand: what you send, what you get and how the price is set.
| Service | You send | You get | How it is priced |
|---|---|---|---|
| 3D printing (FDM)Get a price 3D printing (FDM) | A STEP or STL file | A part printed on a Bambu Lab X2D; six materials, four layer heights | Instantly from the file, estimated |
| Polyurethane castingSee casting prices Polyurethane casting | A file or a master part | Polyurethane parts cast in a silicone mould | Approximate: mould and resin, by quantity |
| Injection moldingWrite to us Injection molding | Your part and the quantity | High-volume production | By conversation, on the mould and quantity |
| 3D design and reverse engineeringTell us your idea 3D design and reverse engineering | An idea, a sketch or the part you have | A production-ready CAD model | Quoted on your request |
| PrototypingTell us about your project Prototyping | Your product idea | A working prototype with its electronics and code | Quoted on your request |
How the price is made
We estimate the filament weight from your file's volume, surface and overhangs; the price is read from the workshop's per-gram tariff for the material group. The smallest order is ₺250, and we confirm the exact price on Instagram before you order.
| Volume | 43.7 cm³ |
|---|---|
| Surface area | 191 cm² |
| Estimated filament | 24.6 g |
| Part price (estimated) | ₺123 |
| Order total (estimated) | ₺250 |
Materials
Six materials for FDM. Values vary by filament brand; we confirm the exact ones with your order.
| Material | Density | Strength | Heat resistance | Flexibility | Typical use | Price |
|---|---|---|---|---|---|---|
| PLAStiff, with a smooth surface. | 1.24 g/cm³ | medium | low | low | Prototypes, models, visual parts | Get a price in PLA |
| PLA+Tougher than PLA, more impact resistant. | 1.24 g/cm³ | medium-high | low | low | Tougher prototypes, everyday-use parts | Get a price in PLA+ |
| PETGResists water and many chemicals. | 1.27 g/cm³ | medium-high | medium | slight | Enclosures, holders, outdoor parts | Get a price in PETG |
| ABSHeat resistant; can be sanded and machined. | 1.04 g/cm³ | high | medium-high | low | Functional parts, surfaces to be finished | Get a price in ABS |
| PA-12Nylon. Resists wear and fatigue. | 1.01 g/cm³ | high | high | medium | Gears, hinges, mechanical parts | Get a price in PA-12 |
| TPUFlexible, rubber-like. | 1.21 g/cm³ | medium | low | high | Seals, bumpers, flexible holders | Get a price in TPU |
Design and reverse engineering
No file? We start there: an idea, a sketch or a broken part is enough.
Send what you have
Describe your idea and add a sketch, photos, a PDF or a STEP file.
We measure and model
We measure the part with a calliper and redraw it in CAD, settling the design with you.
Approve, and we make it
You approve the model; if you like, we price and print it from the same file.
Casting and injection
Polyurethane casting
Right when you need more than a few of the same part, but too few for an injection mould. The price is approximate: a silicone mould plus polyurethane for each piece. We assume 20 castings per mould; that figure is our estimate for classic silicone moulds.
See casting pricesInjection molding
For high-volume production. There is no fixed price; we talk through the mould and the quantity with your part in hand.
Write to us| Pieces | 1 | 10 | 50 | 200 | 1,000 |
|---|---|---|---|---|---|
| Total (approximate) | ₺992 | ₺1,260 | ₺4,377 | ₺15,584 | ₺77,918 |
| Per piece | ₺992 | ₺126 | ₺88 | ₺78 | ₺78 |
| Pieces | Total (approximate) | Per piece |
|---|---|---|
| 1 | ₺992 | ₺992 |
| 10 | ₺1,260 | ₺126 |
| 50 | ₺4,377 | ₺88 |
| 200 | ₺15,584 | ₺78 |
| 1,000 | ₺77,918 | ₺78 |
Orders by Instagram
Message us on Instagram with your quote number; we settle the exact price, payment and delivery there together.
Where is your order?
See its stage and shipment details with your quote number.
| Quote no. | TKL-20261019- An example quote number; yours appears on the quote page. |
|---|---|
| Send | Your quote number, the quantity and any technical drawing. |
| Payment and delivery | Settled together on Instagram; the site takes no payment. VAT included, shipping paid by the buyer; hand delivery too. |
| Order on Instagram (Opens Instagram in a new tab.) | |
Questions
If your question is not answered here, write to us on Instagram or through the contact form.
Contact form| Question | Answer | Figure |
|---|---|---|
| Which files can I upload? | STEP (.step, .stp) and STL (.stl) for an instant price, up to 100 MB per file. You can add technical drawings to the quote as PDF, DXF or images. | 100 MB |
| Is the price final? | No, it is an estimate: we work out the filament weight from the part's volume, surface and overhangs and price it on the workshop's per-gram tariff. The smallest order is ₺250. We confirm the exact price on Instagram before you order. | ₺250 |
| How do infill and layer height change the price? | Infill can be 15%, 30%, 50% or 100%; more infill makes the part heavier and the price follows. The standard layer height is 0.20 mm; finer layers raise the part's filament price: 1.2× at 0.16 mm, 1.4× at 0.12 mm and 1.6× at 0.08 mm. | ×1.6 |
| What if my part does not fit the plate? | The plate is 256 × 256 × 256 mm. A part prints the way it lies in the 3D view on the quote page; if it fits when turned, turn it there and the price follows that orientation. For parts that do not fit, write to us. | 256 × 256 × 256 mm |
| Where does my file go? | While the price is worked out, your file is read only in your browser. When you save the quote to order, it reaches us with your quote number so we can prepare the exact price. | |
| How do ordering, payment and delivery work? | The site takes no payment. You message us on Instagram with your quote number, and we settle the exact price and payment there together. Prices include VAT; the buyer pays for shipping. Orders go to Aras Kargo in about 2 days on average, and hand delivery in Etimesgut (Ankara) is possible too. | 2 days |